High-tech secure bike compound suitable to accommodate both bicycles and/or motorcycles. Manufactured with perforated sheets to the lower part of the shelter and solid transparent sheeting to upper, complete with a 16mm triple wall polycarbonate roof.
GENERAL SPECIFICATION OF BIKE COMPOUND
Capacity: 10 cycles or 4-5 motorcycles
Overall width: 6000mm
Height to front: 2100mm
Finish: Available in hot dipped galvanised to BS EN ISO 1461:1999 or polyester powder coated to a standard BS or RAL Colour
Roofing: 16mm triple wall polycarbonate
Fixing: Adjustable base plates for bolting to concrete or extended legs for submerging into concrete
Construction: Bike Shelters can be linked to form continuous runs.
Bike Compounds have been designed for ease of installation and are supplied in a flat pack form with full technical installation instructions. Alternatively, a full nationwide installation service is available including ground-works.
Please contact the sales office for further information.
FINISHES & COLOURS
Hot Dipped Galvanizing
– to BS EN ISO 1461:1999 This treatment offers a low maintenance, long lasting finish for all types of environment. It is dull silver in appearance.
Polyester Powder Coating for Finishes & Colours
Powder coating has excellent outdoor exposure qualities, as well as offering an attractive consistent appearance in a variety of colours.
The importance of the finish is not only the visible top coat, but, equally, the pre-treatment of the steelwork. All Apex products are shot blast to SA2.5 to degrease the surface and provide a key for the subsequent processes. The steel is then etch primed with Zinc Phosphate anti-corrosive Primer then the final coat of Polyester Powder is electrostatically sprayed onto the surface to a thickness of 80 – 110 microns. The treated steelwork is then heat-cured, melting the Polyester Powder into a continuous phase and bonding it into the steelwork. Polyester Powder Coating provides a high durability and high resistance to weathering plus excellent colour stability.