Lambda Bike Cage - Apex Shelter Systems

Lambda Bike Cage – Apex Shelter Systems

Lambda Cycle Cage

Lambda Cycle Cage

Lambda Bike Cage - Apex Shelter Systems

Lambda Bike Cage – Apex Shelter Systems

The Lambda Security Cage is ideal for the external storage of cycles, motorcycles or scooter racks.

GENERAL SPECIFICATION OF CYCLE CAGES

Lengths: 4060mm and 5060mm, other sizes are available
Capacity: 20 cycles or 8-10 motorcycles, 24 cycles or 10-12 motorcycles respectively
Overall width: 5000mm
Height to lowest point: 2500mm
Finish: Available in hot dipped galvanised or polyester powder coated – see colour chart on P6
Roofing: Plastisol Coated Steel to a standards BS or RAL Colour
Fixing: Base Fixed
Construction: Cycle cages can be linked to form continuous runs.

INSTALLATION

Bike cages and scooter cages have been designed for ease of installation and are supplied in a flat pack form with full technical installation instructions. Alternatively, a full nationwide installation service is available including ground-works.
Please contact the sales office for further information.

LAMBDA CYCLE CAGE

Single access compound with floor-mounted cycle racks. If junior versions or motorcycle racks are required, please contact the sales department.

Hot Dipped Galvanizing
– to BS EN ISO 1461:1999 This treatment offers a low maintenance, long lasting finish for all types of environment. It is dull silver in appearance.

Polyester Powder Coating for Finishes & Colours
Powder coating has excellent outdoor exposure qualities, as well as offering an attractive consistent appearance in a variety of colours.

The importance of the finish is not only the visible top coat, but, equally, the pre-treatment of the steelwork. All Apex products are shot blast to SA2.5 to degrease the surface and provide a key for the subsequent processes. The steel is then etch primed with Zinc Phosphate anti-corrosive Primer then the final coat of Polyester Powder is electrostatically sprayed onto the surface to a thickness of 80 – 110 microns. The treated steelwork is then heat-cured, melting the Polyester Powder into a continuous phase and bonding it into the steelwork. Polyester Powder Coating provides a high durability and high resistance to weathering plus excellent colour stability.

Specification Sheet for Lambda Cycle Cage – PDF Download