Omega P R10 cycle cage

Ideal for the external storage of cycles, motorcycles or scooter racks. The robust mesh panels provide both high security and visibility throughout the shelter.


Lengths: 4060mm and 5060mm, other sizes are available
Capacity: 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively
Overall width: 2500mm
Height to highest point: 2150mm
Finish: Hot dipped galvanized to BS EN ISO 1461:1999
Roofing: Plastisol Coated Steel to a standards BS or RAL Colour
Fixing: Base Fixed


Cycle Cages have been designed for ease of installation and are supplied in a flat pack form with full technical installation instructions. Alternatively, a full nationwide installation service is available including ground-works.
Please contact the sales office for further information.

The importance of the finish is not only the visible top coat, but, equally, the pre-treatment of the steelwork. All Apex products are shot blast to SA2.5 to degrease the surface and provide a key for the subsequent processes. The steel is then etch primed with Zinc Phosphate anti-corrosive Primer then the final coat of Polyester Powder is electrostatically sprayed onto the surface to a thickness of 80 – 110 microns. The treated steelwork is then heat-cured, melting the Polyester Powder into a continuous phase and bonding it into the steelwork. Polyester Powder Coating provides a high durability and high resistance to weathering plus excellent colour stability.