Alpha Tep iMC Motorcycle Shelter with Transparent Roof and End Panels
Contemporary Motorbike Shelters suitable to accommodate motorcycles and/or cycles.
Motorcycles can be free-standing or the shelter can be manufactured with an integral locking rail to the rear of the shelter so motorcycles can be secured via chain or D lock.
Photograph shows a bank of cycle, motorcycle and combined smoking shelter.
GENERAL SPECIFICATION OF MOTORBIKE SHELTERS
Single Unit Lengths: 2560mm, 3060mm, 4060mm and 5060mm
Capacity: 6 cycles or 2-3 motorcycles, 8 cycles or 3-4 motorcycles, 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively.
Overall width: 2100mm
Height to front: 2100mm
Finish: Available in hot dipped galvanised BS EN ISO 1461:1999 or polyester powder coated to a standard BS or RAL Colour
Roofing: Plastisol Coated Steel to a standard BS or RAL Colour (Alpha P) or 5mm thick transparent PET (Alpha T)
Fixing: Adjustable base plates for bolting to concrete or extended legs for submerging into concrete
Construction: Shelters can be linked to form continuous runs.
INSTALLATION OF MOTORBIKE SHELTERS
Motorbike Shelters have been designed for ease of installation and are supplied in a flat pack form with full technical installation instructions. Alternatively, a full nationwide installation service is available including ground-works.
Please contact the sales office for further information.
ALPHA IMC MOTORCYCLE SHELTERS
Loading: Integral fully welded rail to rear of shelter for securing motorcycles.
END PANELS (EP)
5mm thick Transparent PET End Panels are available for the Alpha Shelter
Alpha Motorcycle Shelters can be supplied any length to suit your requirements.